SRV door frames

[P6X6]

Hello all,
After the recent auctions, I've been inspired to make some SRV style door frames and spare wheel carriers for my RFSV. Could anyone with information, photos or plans of them please post them up here. I have some some idea of how they are put together.

[Barefoot dave]

Oh crap, sorry mate.
Was making arrangements for my car and left you hanging.
I'll post the photos and schematics up here for all to refer to.

[P6X6]

Oh crap, sorry mate.
Was making arrangements for my car and left you hanging.
I'll post the photos and schematics up here for all to refer to.

Don't be sorry mate !!!!!
I won't be needing them for a while yet. Also thought I'f there were put up here, more people could benefit from it than just me 😊

[Barefoot dave]

Ok folks.
Unfortunately, the only edtail photos I have are not so crash hot. Poor light and the door pocket hides a bit of detail.
The RPS is much more detailed with dimensions of plates etc detailed. The frames themselves are too complex to have specs listed, but they just basically fit the door hole. other measurements (wheel supports/ cross braces) can be interpolated.
Eagle eyes will see the RPS numbers do not start at 001. The missing numbers relate to the sheet prior which was for the standad (cut-down) doors. N/A for this.

[Welby]

i have 3 or four pics, but keep getting a message I don't have authority to post, so wait out, i'm working on it.

[boxy]

http://s1153.photobucket.com/user/adammasanbryce/library/Land%20Rover/Mobile%20Uploads/203005%20SRV%2023rd%20March%202015

Here are the pics I took of 203-005 at Minto

[Budgie]

Let me see what I can do,
I acquired two ex ADG vehicles for the RAAF Amberley Aviation Heritage centre and the RAAF Museum at Point Cook,
Very busy ATM but pm me to remind me to go the the heritage centre to get the required details
Cheers

[P6X6]

Ok folks.
Unfortunately, the only edtail photos I have are not so crash hot. Poor light and the door pocket hides a bit of detail.
The RPS is much more detailed with dimensions of plates etc detailed. The frames themselves are too complex to have specs listed, but they just basically fit the door hole. other measurements (wheel supports/ cross braces) can be interpolated.
Eagle eyes will see the RPS numbers do not start at 001. The missing numbers relate to the sheet prior which was for the standad (cut-down) doors. N/A for this.

Hey mate, where do I go to get the RPS?

[Barefoot dave]

Been having trouble getting the size of the images down to upload here. will have another go today.
I won't release the full rps because of real or perceived OpSec reasons.

[P6X6]

Been having trouble getting the size of the images down to upload here. will have another go today.
I won't release the full rps because of real or perceived OpSec reasons.

Thanks for all the effort mate !!
You could just email me the info? That way I can get the good quality pics 😊

[Welby]

[Welby]

[Welby]

[Welby]

[Welby]

and a bonus for your patience