Author Topic: 110 Perentie 6x6 front diff. parts  (Read 3081 times)

Offline Marshall

  • Newbie
  • *
  • Posts: 3
  • THANKS 0
  • Location: East Malvern
110 Perentie 6x6 front diff. parts
« on: January 13, 2015, 02:16:50 PM »
Gidday,

I'm new to this site and REMLR, so here goes...
I need some internal parts for the front diff. of my 110 Perentie 6x6 Personnel & Cargo carrier.
Can anyone tell where I might find parts or if you know who might be wrecking one similar ?

Thanks, Marshall.

Offline Diana Alan

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2241
  • THANKS 108
Re: 110 Perentie 6x6 front diff. parts
« Reply #1 on: January 13, 2015, 06:20:39 PM »
Hi Marshall

I would give KLR at South Windsor NSW a call.  They have been doing work on a number of 6x6 Perentie, including diff ratio change if the rumour mill is working, so may have some of the parts you require.

Diana
REMLR 240.
Perentie FFR 50-422, SIII FFR 30-146, SIIA GunBuggy 112-726, Mk3 Inter 170-437, ex-SADF SIIB/SIII Radio Relay,
Army Trailers: No5 x 2, W/S x 2, PT1-1.2, Horndraulic ATR dog trailer.
Civilian: MY85 RRc HiLine 4.6, MY51 ex-RACQ 80", MY91 Defender/Reynolds Boughton 6x6, MY12 D4 SDV6

Offline 303Gunner

  • REMLR Inc
  • Veteran
  • *
  • Posts: 1127
  • THANKS 128
  • Location: Lithgow, NSW
  • REMLR No: 128
Re: 110 Perentie 6x6 front diff. parts
« Reply #2 on: January 14, 2015, 02:14:22 AM »
What specific parts do you need? Beside the housing itself and the inner axle shafts, most parts are readily available standard Series/County/Defender bits.

Offline Marshall

  • Newbie
  • *
  • Posts: 3
  • THANKS 0
  • Location: East Malvern
Re: 110 Perentie 6x6 front diff. parts
« Reply #3 on: January 16, 2015, 10:16:04 AM »
Thanks for the feed back...I'll follow up the KLR lead.
It is the longer (than standard) inner axle shaft that I'm after, along with crown wheel, pinion, sun gears etc.
Fantastic news if the balance is standard other than the axle length.
Cheers, Marshall.

Offline 303Gunner

  • REMLR Inc
  • Veteran
  • *
  • Posts: 1127
  • THANKS 128
  • Location: Lithgow, NSW
  • REMLR No: 128
Re: 110 Perentie 6x6 front diff. parts
« Reply #4 on: January 18, 2015, 01:38:29 AM »
Hi Tough Engineering have made replacement shafts for the 6x6 axles for the Army, and they will not only have the correct lengths and dimensions, they will be a strength upgrade over the original. Pop the rubber caps off your rear hubs, and if they are already Hi Tough replacements, they will have a "HTE" part number stamped on the end of the shaft.

https://plus.google.com/116703277152650632775/about?gl=au&hl=en