The Registry Of Ex-Military Land-Rovers Au, NZ, etc
Australian Army

 

The Australian 1/2 Ton Workshop Platform Trailer 

The 1/2 Ton Workshop trailer is often mis identified as the No.5 Workshop Trailer. The Workshop trailer does utilise the No.5 Trailer chassis, however the platform that sits upon it is the same one that was developed by the Army Design Establishment for use on the workshop variant of the 3/4 ton Land Rover.

To see some Trailer, Platform ½ ton "Workshop" archive photos from when they were new, head to the ADE PR Photos page

The Census Codes for the workshop trailer variants can be found on the Census Codes page, however these variants were all modified from the basic Census 6015E, Trailer, 1/2 Ton, Platform, Machinery and most are Census 6017 with varying suffix letters. Further information about these is listed below.


Workshop Truck and Workshop Platform Trailer layout Photographs.

  


6017 - Automotive Repair Shop, Trailer Mounted, 1/2 Ton, Garage

Data Sumary - EMEI H030
CES - 002157
RPS - AUST/MT/157 (Chassis only)
Weight - Unladen: 430kg, Maximum: 840kg
Light and Power Equipment -

      • 2 core 460 mm c/w socket and lugs
      • 3 core 1830 mm c/w plug and power outlets
      • 3 core 1830 mm c/w plug and socket x4
      • 3 core 9140 mm c/w plug and socket
      • rod earthing MS 910 mm lg by 35 mm dia
      • panel, power distribution
      • light, extension, fluorescent, w/cable, 240v ac x3

Garage Equipment -

      • Compressor
      • hose air, 6 mm ID by 18 meters
      • battery storage, 12v, 19 plate
      • bench, welders, portable, pneumatic tyres
      • cleaner and tester, spark plug, champion, series 800
      • clapm 'C' medium service, w/thumb screw drive, 100 mm x2
      • siamond, stone dressing
      • drill electrical, portable, 240 V, 6mm
      • drill electrical, portabl;e, 240 V, 13mm
      • drill set twist, high speed steel
      • firebrick, 230 mm by 115 mm by 75 mm x3
      • gauge, chuck, tyre inflation 8200 kPa
      • adapter coupling, double grip, 12mm ID hose x2
      • hydrometer, secondary cell
      • machine, grinding, electrical, portable, 240 V, 150mm
      • mallet rubber, flat faced
      • padlock, brass x6
      • pump bucket, bubricating, hand operated
      • reamer set, poppet valve seat, coxhead
      • puller kit, mechanical, valve guides and bushes, coxhead
      • shears, metal cutting, hand 255 mm straight
      • soldering iron, gas, sieverts
      • stand, portable, electrical grinder, lightweight
      • tailpiece, brass od hose
      • test set, battery discharge
      • tool box, portable, steel
      • torch outfit, cutting and welding, oxy-acetylene
      • wrench, torque break type, 162 nm

Click to expand

View from the rear of the trailer showing CES in stowed positions.


6017A - Machine Shop, Trailer Mounted, 1/2 Ton

Data Sumary - EMEI H030-2
CES - 002193
RPS - 02060, AUST/MT/150 (Chassis only)
Weight - Unladen: 430kg, Maximum: 800kg
Repair Shop Equipment -
Light and Power Equipment -
Technical Equipment -

Click to expand

View from the near side of the trailer showing CES in stowed positions.

Click to expand

View from the off side of the trailer showing CES in stowed positions

Click on pic

Click on pic

Click on pic

Click on pic

Click on pic

Click on pic

Click on pic


6017B - Electronic Equipment Repair Shop, Trailer Mounted, 1/2 Ton, Telecommunications

Data Sumary -
CES - 002174
RPS -
Weight -
Repair Shop Equipment -
Light and Power Equipment -
Technical Equipment -

Click to expand

View from the rear of the trailer showing CES in stowed positions. Cabinets bondwood showin in alternative position similar to truck.


6017E - Small Arms Repair Shop, Trailer Mounted, 1/2 Ton

Data Sumary - EMEI H030-3
CES - 002179
RPS - AUST/MT/150 (Chassis only)
Weight - Unladen: 430kg, Maximum: 815kg
Repair Shop Equipment -
Light and Power Equipment -
Technical Equipment -

Click to expand

View from rear of trailer with CES in stowed position.

Click on pic

The original version of the above photograph.


6017F - Shop Equipment, Electrical Repair, Trailer Mounted, 1/2 Ton

Data Sumary - EMEI H030-4
CES - 002177
RPS - AUST/MT/157 (Chassis only)
Weight -
Repair Shop Equipment -
Light and Power Equipment -
Technical Equipment -

Click to expand

View from the rear of the trailer showing CES in stowed position.

Click to expand

View from near side with CES in stowed position.


6017G - Instrument Repair Shop, Trailer Mounted, 1/2 Ton

Data Sumary - EMEI H030-7
CES - 002171
RPS - AUST/MT/157 (Chassis only)
Weight - Unladen: 430kg, Maximum: 755kg
Repair Shop Equipment -
Light and Power Equipment -
Technical Equipment -

Click to expand

View from the rear of the trailer showing CES in stowed position.


6017H - Welding Shop, Trailer Mounted, 1/2 Ton, ARC/GAS

Data Sumary - EMEI H030-5
CES - 002375
RPS - AUST/MT/02060(Chassis only)
Weight - Unlaiden: 430kg, maximum:810kg
Welding Shop Equipment -

      • Extension, adjustable, bow vehicle
      • frame cover, vehicular body
      • post corner, long x2
      • post corner, short x2
      • top assmbly extension kit, vehicular fitting w/o floor

Light and Power Equipment -

      • 2 core 460 mm c/w socket and lugs
      • 3 core 1830 mm c/w plug and power outlets
      • 3 core 1830 mm c/w plug and socket x4
      • 3 core 9140 mm c/w plug and socket
      • light, extension, fluorescent w/cable, 20W, 240V ac x3
      • nibbler, electric, portable, 240V, 14 SG
      • panel, power distribution
      • rod earthing, MS, 810 lg by 35 mm dia

Technical Equipment -

      • dividers, mechanics, wing type 205 mm
      • drill, electric, portable, 6 mm, 240 V AC heavy duty
      • drill set, twist3 1mm to 12 mm
      • clamp 'C' medium service, w/thumbscrew drive, 100mm
      • clamp 'C' medium service, w/thumbscrew drive, 150mm
      • anvil, blacksmiths, single horn 25kg
      • blanket, fire, asbestos l 830 mm by l 830 mm
      • brick refractory, straight, 230mm by 110 mm by 80mm x2
      • brush, dusting, bench, 300mm lg
      • tool kit, body and fender repair
      • vice bench and pipe, universal, w/cylinder head holding plug and jaw grips 100mm x
      • welding machine, ARC, generator type 250 amp
      • tongs, blacksmith, flat 455mm lg
      • tongs, blacksmith, gad or bolt type 510mm lg
      • tongs, blacksmith, hollow nose 455mm lg
      • flatter, blacksmiths, handled, 65mm sq face
      • goggles, indusctrial
      • hammer, hand, sledge 4.5 kg

Click on pic


6017K - Welding Shop, Trailer Mounted, 1/2 Ton, ARC/ Shielded Gas

Data Sumary -
CES - 002183
RPS -
Weight -
Light and Power Equipment -
Technical Equipment -

Click to expand

View from front near side of trailer with VW powered welder in stowed position.

Click to expand

View from rear of trailer..


6017L - Electronic Equipment Repair Shop, Trailer Mounted, 1/2 Ton, Radar

Data Sumary -
CES - 002294
RPS -
Weight -
Light and Power Equipment -
Technical Equipment -

Click to expand

View from off side of the trailer showing CES in stowed position


6017N - Lubricating & Servicing Unit, Power Operated, Trailer Mounted, 1/2 Ton

Click on pic


6017R - Shop Equipment Utility, Trailer Mounted, 1/2 Ton

Data Sumary - EMEI H030-1
CES - 002335
RPS - 02059 & AUST/MT/150 (Chassis only)
Weight -
Light and Power Equipment -
Technical Equipment -


6102 - Platform, Office

Data Sumary - EMEI H040
CES - 002319
RPS - AUST/MT/157 (Chassis only)
Weight - Unlaiden: 950kg. Maximum: 1562kg

Click to expand

View from rear of trailer showing basic arrangement of CES storage, but with folding table erected.

Click to expand

View from near side rear showing internal stowage space of cabinet. The cabinet lid becomes work space, and upper portion folds back for correspondence trays. 


6128 -Trailer, Maintenance, 1/2 Ton, Binned

Click to expand

View from rear showing bin packs in transit position.

Click on pic

 

Go to www.remlr.com   CLOSE down this page