« previous next »
Pages: [1]

Author Topic: 2A and 3 Stub Axles  (Read 2167 times)

Offline rednjoey

  • Jr. Member
  • **
  • Posts: 85
  • THANKS 14
  • Location: Perth W.A.
  • REMLR No: 323
2A and 3 Stub Axles
« on: November 24, 2012, 07:49:13 PM »
A question for the gurus out there amongst you REMLR chaps...
Is there any difference between the series 2A and series 3 stub axles.
I know the axles themselves differ in the number of splines but are the rest of the front bits interchangeable?

Cheers
Logged
Wade Adams
1967 2A 109 GS 114-349
"Laugh...I thought my boots would never dry"

Offline cookey

  • REMLR Inc
  • Full Member
  • *
  • Posts: 144
  • THANKS 57
  • ex-crafty
  • Location: sydney
  • REMLR No: 356
Re: 2A and 3 Stub Axles
« Reply #1 on: November 25, 2012, 09:00:57 AM »
Hi Wade,

the stub axles and hubs are different.
 
2a has a larger inner bearing whereas series 3 are same inner and outer.
Series 3 has a seal in the back of the stub axle.
Series 3 has larger diameter wheel studs.

The whole assemblies are interchangeable but not the individual parts.

cookey
Logged
lost count

Offline rednjoey

  • Jr. Member
  • **
  • Posts: 85
  • THANKS 14
  • Location: Perth W.A.
  • REMLR No: 323
Re: 2A and 3 Stub Axles
« Reply #2 on: November 25, 2012, 12:44:38 PM »
OK
So what about swivel hubs and swivel housings, interchangeable or not?
Logged
Wade Adams
1967 2A 109 GS 114-349
"Laugh...I thought my boots would never dry"

Offline cookey

  • REMLR Inc
  • Full Member
  • *
  • Posts: 144
  • THANKS 57
  • ex-crafty
  • Location: sydney
  • REMLR No: 356
Re: 2A and 3 Stub Axles
« Reply #3 on: November 26, 2012, 08:53:12 AM »
Swivel hubs and housings all the same.

Cookey
Logged
lost count
Pages: [1]
« previous next »