Author Topic: Perentie 4wd Brake master, is it compatible with XD Falcon?  (Read 1197 times)

Offline cds900

  • Newbie
  • *
  • Posts: 13
  • THANKS 0
  • Location: Goldfields
  • REMLR No: 50-187
Perentie 4wd Brake master, is it compatible with XD Falcon?
« on: January 23, 2023, 12:29:42 PM »
Gday all,

Just a quick question, does anyone here know if the PBR brake master P10050 fit the 4wd Perentie?  It certainly looks the same, but I can't find any reference that's definitive either way.  It's a lot cheaper than the 'Perentie' one from parts suppliers. 

Thanks,  Chris

Offline BEARMAN

  • Hero Member
  • *****
  • Posts: 732
  • THANKS 114
  • Location: Hay Point
  • REMLR No: 430
Re: Perentie 4wd Brake master, is it compatible with XD Falcon?
« Reply #1 on: January 23, 2023, 09:10:57 PM »
Gday all,

Just a quick question, does anyone here know if the PBR brake master P10050 fit the 4wd Perentie?  It certainly looks the same, but I can't find any reference that's definitive either way.  It's a lot cheaper than the 'Perentie' one from parts suppliers. 

Thanks,  Chris

Chris, Just be careful you get the correct one. There are 2 types in this model, one is 1" and the other is 15/16", make sure you get the 1" one. Fords and Holdens had the sloped reservoir whereas the Perenties had the level reservoir. You can change the reservoirs from one onto the other is yours is still in good condition.
09/1998 Perentie 6X6 ARN202516 - BRUTUS

Offline cds900

  • Newbie
  • *
  • Posts: 13
  • THANKS 0
  • Location: Goldfields
  • REMLR No: 50-187
Re: Perentie 4wd Brake master, is it compatible with XD Falcon?
« Reply #2 on: January 24, 2023, 02:48:24 PM »
Hey Bearman,

Thanks so much for your reply, I'll be sure to look for the 1 in version.  Might see if I can buy it physically as opposed to over the internet.  These things don't seem to be very carefully numbered from the maker to aid ID.   The Perentie one has nothing on top or on the sides.  The reservoir is ok, top seal is toasted and I suspect the seals have had it too.  Thanks! 

Offline Minikeg

  • REMLR Inc
  • Sr. Member
  • *
  • Posts: 461
  • THANKS 77
  • Location: Newcastle
  • REMLR No: 316
Re: Perentie 4wd Brake master, is it compatible with XD Falcon?
« Reply #3 on: February 15, 2023, 12:33:05 AM »
see diagrams of both here, bore size and repair kits are shared
I'm not completely useless.. I'm missing some of the pieces
110-415 'Agro' 1959 88" CR              111-676 'Pickles II' 1959 88" CR
114-270 'Maya' 1967 109" GS/WS      113-368 'Castrol' 1964 88" GS
48-975 'Reptar' 1988 110" FFR           48-932 'Widget' 1988 110" GS