Author Topic: S2a brakes  (Read 592 times)

Offline john w

  • Newbie
  • *
  • Posts: 3
  • THANKS 0
  • Location: noosa
S2a brakes
« on: December 22, 2022, 10:05:04 AM »
  Have fitted new  master brake cylinder [CB type ] and after putting 2 litres of fluid in an attempt to 'bleed' system, still have no brakes !
  Pressurised system initially, as per manual. Took for a road test after getting slight positive pedal pressure but  did not last.
I do have VH44 booster fitted and not sure if this is causing complications.
 I notice from the manual the CV type master cylinder seems to be less complicated re bleeding .
 Ant suggestions on where I am going wrong appreciated, including comments on CV type.