Author Topic: Cam net straps for a RFSV  (Read 914 times)

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 341
  • THANKS 15
  • Location: Springfield
Cam net straps for a RFSV
« on: November 12, 2022, 03:45:56 PM »
Does anyone have any pictures / specs for the tiedown straps for the cam net rack on a RFSV?

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 341
  • THANKS 15
  • Location: Springfield
Re: Cam net straps for a RFSV
« Reply #1 on: November 14, 2022, 07:29:28 PM »
seems no one has asked this on before anyway does anyone know where I can source the metal fittings for the webbing and I will make a educated guess of how the tiedown straps worked.
Thanks folks

Offline glbest

  • Sr. Member
  • ****
  • Posts: 455
  • THANKS 19
  • Location: bne
Re: Cam net straps for a RFSV
« Reply #2 on: November 16, 2022, 11:40:56 AM »
in the remlr library  i believe there is a technical handbook for RFSV if not the RPS Guide will give the information. It has been a while since they were locally sourced from Direct unit Funds for replacements as it was quicker than to relay on the supply system. When I worked in the vehicles store at South Queensland Log Group we did not issue them as they were a gen stores item and came from DNSDC


hope this helps  greg

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 341
  • THANKS 15
  • Location: Springfield
Re: Cam net straps for a RFSV
« Reply #3 on: November 28, 2022, 01:33:32 PM »
Thanks heaps. Somewhere in the curiosity shop I have a roll of the original webbing so you have helped me out. ;)

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 341
  • THANKS 15
  • Location: Springfield
Re: Cam net straps for a RFSV
« Reply #4 on: January 09, 2023, 07:13:51 PM »
I know that someone supplied a link to where I could get the metal clips for the webbing but it seems to have disappeared from the post ????
Could the poster give me the link again. thanks

Offline BronzeCraft

  • Newbie
  • *
  • Posts: 4
  • THANKS 0
  • Location: USA
Re: Cam net straps for a RFSV
« Reply #5 on: January 30, 2024, 10:48:31 PM »
For tiedown straps on the RFSV cam net rack, I went for heavy-duty ones, like those used for motorcycles.

Offline glbest

  • Sr. Member
  • ****
  • Posts: 455
  • THANKS 19
  • Location: bne
Re: Cam net straps for a RFSV
« Reply #6 on: February 01, 2024, 12:18:20 PM »
http://kingcanvas.com.au/

I hope this is the supplier you are looking for


greg

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 341
  • THANKS 15
  • Location: Springfield
Re: Cam net straps for a RFSV
« Reply #7 on: February 01, 2024, 04:41:29 PM »
Thanks I will give them a call
Tom