Author Topic: Routing of new wiring harness on 109" GS  (Read 132 times)

Offline Barra

  • Newbie
  • *
  • Posts: 31
  • THANKS 0
  • Location: Kilcoy QLD
  • REMLR No: 574
Routing of new wiring harness on 109" GS
« on: April 21, 2021, 04:53:01 PM »
Hi Guys,

does anyone have a photo or photos of their harness routing in the engine bay. I stupidly removed the old harnesses without noting or taking shots of the actual routing, particularly the Temp/Cold Start/Oil press harness on the RH side of the engine. Also if your shot includes the direction from the Tail harness up vertically to connect with the Main harness. I have successfully installed the Tail harness thru the RH Chassis rail but when it comes up vertically is a little trickier.

I found the VinWire harness very good, had a few little issues such as shorter wires in some cases (eg Oil Press, Main Fuse block wires) and the little labels are also very fragile (when pulling harness into place, plus the harness does not appear to take into consideration the Oil Pressure gauge (OK for the idiot light).

The instruction were generally good, easy to follow except for "connects to X on the Flasher unit/can" which is not marked on the Hella Flasher can fitted.

Cheers,

Barra