Author Topic: Mk3/Mk4 rear brake puller type cylinder  (Read 411 times)

Offline Tankradio

  • Full Member
  • ***
  • Posts: 153
  • THANKS 4
  • Location: High in the mountains of NSW
  • REMLR No: 118
Mk3/Mk4 rear brake puller type cylinder
« on: May 30, 2020, 04:19:00 PM »
Hello,

Hoping someone might have a spare rebuildable brake cylinder for Mk3/Mk4 rear axle as per the photo

One of mine had a fractured mounting flange from before I got it. Also the alloy spacer bracket came off in pieces so I need to find one as well ?

Cheers

Phill
AKA Tankradio, Army Veteran & retired Detective, owner, 1944 GPW USMC Ambulance project, 1953 Ferret Mk1, 1954 Ferret Mk2, 1963 No1 Mk3 International GS, 1964 2A Land Rover RAEME Workshop, 1971 No1 Mk4 International GS, 1978 S3 Land Rover FFR RAAC, 1978 S3 Land Rover FFR RAE, 1988 Perentie GS Ex SAS

Offline Tankradio

  • Full Member
  • ***
  • Posts: 153
  • THANKS 4
  • Location: High in the mountains of NSW
  • REMLR No: 118
Re: Mk3/Mk4 rear brake puller type cylinder
« Reply #1 on: November 10, 2020, 03:57:45 PM »
Bump...

No longer require a brake cylinder as I now have a spare for rebuild.

I still need an alloy adapter block as previous owner damaged one dismantling it.

Cheers

Phill
AKA Tankradio, Army Veteran & retired Detective, owner, 1944 GPW USMC Ambulance project, 1953 Ferret Mk1, 1954 Ferret Mk2, 1963 No1 Mk3 International GS, 1964 2A Land Rover RAEME Workshop, 1971 No1 Mk4 International GS, 1978 S3 Land Rover FFR RAAC, 1978 S3 Land Rover FFR RAE, 1988 Perentie GS Ex SAS

Offline john.k

  • Full Member
  • ***
  • Posts: 205
  • THANKS 29
  • Location: brisbane
Re: Mk3/Mk4 rear brake puller type cylinder
« Reply #2 on: December 06, 2020, 03:16:29 PM »
The ally spacer is a standard Girling part on various other UK made trucks.......check out some UK sources for it.

Offline Tankradio

  • Full Member
  • ***
  • Posts: 153
  • THANKS 4
  • Location: High in the mountains of NSW
  • REMLR No: 118
Re: Mk3/Mk4 rear brake puller type cylinder
« Reply #3 on: December 07, 2020, 12:37:09 AM »
Hello John, thanks for that tip.

I will get onto the net and see what comes up...

Cheers

Phill
AKA Tankradio, Army Veteran & retired Detective, owner, 1944 GPW USMC Ambulance project, 1953 Ferret Mk1, 1954 Ferret Mk2, 1963 No1 Mk3 International GS, 1964 2A Land Rover RAEME Workshop, 1971 No1 Mk4 International GS, 1978 S3 Land Rover FFR RAAC, 1978 S3 Land Rover FFR RAE, 1988 Perentie GS Ex SAS

Offline john.k

  • Full Member
  • ***
  • Posts: 205
  • THANKS 29
  • Location: brisbane
Re: Mk3/Mk4 rear brake puller type cylinder
« Reply #4 on: December 11, 2020, 09:46:52 PM »
The closed end brake cylinder is also a standard Girling brake part,and very expensive......I recall something like $150 back in 1970.