I have a 6x6 cargo (aka Betty).
I have replaced the headlights with LED versions... bit of a game because someone had butchered one of the headlights when they replaced the original unit...any way not part of the story....
During the process I hooked up the indicators and side lights to the led units so that they work in unison. First one all good. Second one head and sidelights ok but no indicator..... in fact no indicators at all..... and no reversing lights either...
Checked the fuse, looks ok and the meter says it's ok too.
I've done a full fault check on the reversing lights. The pressure switch, the reversing light switch and the lights are all ok. However there is no incoming power to the pressure switch.
The flasher unit seems ok too - unless there are two units, in which case I've only found one.
I've looked at the circuit diagrams (VEH G203 ISS 2_*_of_3.pdf) but (basically) they're so fuzzy I can't really follow them.
There doesn't seem to be any power on either side of the fuse socket... Which I'm guessing is the issue.
I did have a similar issue a couple of weeks ago but it "magically" disappeared...or not!!
Any advice or guidance from the collected brains trust most welcome.
Oh.. The hazard lights work but I think they are on a separate circuit (??)
Jon
UPDATE: Found the problem.... Faulty relay (not the hazard switch)