Author Topic: Anyone got the RPS for the Haulmark PT2-2 trailer?  (Read 3585 times)

Offline Mick_Marsh

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2009
  • THANKS 105
  • Location: Western Victoria
  • REMLR No: 310
Anyone got the RPS for the Haulmark PT2-2 trailer?
« on: May 30, 2017, 04:29:58 PM »
Or for the PT1-1.2 for that matter.
REMLR # 310, MVCA # 364, 101 Club # 2188, MHG #101
29-417 101 GS, 30-248 101 Rapier Tractor. 30-238 101
34-597 Crump & Cornish 1 ton Cargo Trailer
RT21 RAAF Track Tactical Trailer, 234-671 RAAF Track Tactical Trailer

Offline Mick_Marsh

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2009
  • THANKS 105
  • Location: Western Victoria
  • REMLR No: 310
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #1 on: May 30, 2017, 04:30:45 PM »
The important info I need for today is wheel bearing kit.
REMLR # 310, MVCA # 364, 101 Club # 2188, MHG #101
29-417 101 GS, 30-248 101 Rapier Tractor. 30-238 101
34-597 Crump & Cornish 1 ton Cargo Trailer
RT21 RAAF Track Tactical Trailer, 234-671 RAAF Track Tactical Trailer

Offline Diana Alan

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2241
  • THANKS 108
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #2 on: May 31, 2017, 08:56:05 AM »
Or for the PT1-1.2 for that matter.
I don't have the RPS but the Operators Manual lists the following:

104.Axles
Manufacturer: Engineered Transport Equipment
Type:Tubular steel beam

105.Main Brakes
Manufacturer: Cebco
Type:Caliper Disc Brake with C500 Hydraulic Override Coupling

106.Park Brakes
Manufacturer: Cebco
Type:Internal expanding, single shoe drum type brakes on rear wheels only"

Perhaps you could attempt to contact one of the component manufacturers or even Haulmark in Queensland (Haulmark were very helpful when I bought my PT1-1.2 back in 2011 they may even have the parts in their supply chain, they had canopies if I wanted one )
REMLR 240.
Perentie FFR 50-422, SIII FFR 30-146, SIIA GunBuggy 112-726, Mk3 Inter 170-437, ex-SADF SIIB/SIII Radio Relay,
Army Trailers: No5 x 2, W/S x 2, PT1-1.2, Horndraulic ATR dog trailer.
Civilian: MY85 RRc HiLine 4.6, MY51 ex-RACQ 80", MY91 Defender/Reynolds Boughton 6x6, MY12 D4 SDV6

Offline dugite

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 1078
  • THANKS 102
  • Location: Tamworth
  • REMLR No: 374
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #3 on: May 31, 2017, 10:27:49 AM »
When I got mine I gave it a once-over. I just took the old seals into a local bearing shop and they had equivalent. I'm reasonably sure that this would also apply to the bearings (mine were fine and I just repacked them).

Do you suspect a problem with yours ?
2a 109 114-341,
No.5 173-589,
W/S Platform 178-000,
PT1 204-796

Offline Mick_Marsh

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2009
  • THANKS 105
  • Location: Western Victoria
  • REMLR No: 310
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #4 on: May 31, 2017, 11:03:07 AM »
When I got mine I gave it a once-over. I just took the old seals into a local bearing shop and they had equivalent. I'm reasonably sure that this would also apply to the bearings (mine were fine and I just repacked them).

Do you suspect a problem with yours ?
The person who is transporting it said the rear wheels got a little warm when they collected it.
I'm just trying to cover all bases before they drag it over from Adelaide. I suspect they will repack the bearings before they start out but I want to prepare them if they find the bearings are stuffed.
So, with the trailer over 400km from me, I am trying to buy a couple of wheel bearing kits from the local bearing supplier with no idea what bearings and seals I need.
It's a complicated story that can only be solved with bearing and seal part numbers given to the local bearing shop.
REMLR # 310, MVCA # 364, 101 Club # 2188, MHG #101
29-417 101 GS, 30-248 101 Rapier Tractor. 30-238 101
34-597 Crump & Cornish 1 ton Cargo Trailer
RT21 RAAF Track Tactical Trailer, 234-671 RAAF Track Tactical Trailer

Offline dugite

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 1078
  • THANKS 102
  • Location: Tamworth
  • REMLR No: 374
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #5 on: May 31, 2017, 11:22:50 AM »
HUA  :)

   for a trip like that I would also be checking them first
2a 109 114-341,
No.5 173-589,
W/S Platform 178-000,
PT1 204-796

Offline Mick_Marsh

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2009
  • THANKS 105
  • Location: Western Victoria
  • REMLR No: 310
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #6 on: May 31, 2017, 01:20:36 PM »
HUA  :)

   for a trip like that I would also be checking them first
I believe I said that is what they will be doing.

Now, I also believe I said I would like to have wheel bearing kits available to them if they find the bearings are stuffed or at least, that was the intention in my posts.

I also believe I have indicated I need information to source a wheel bearing kit from the local suppliers, i.e. part numbers.

If I have been unclear, I apologise.
REMLR # 310, MVCA # 364, 101 Club # 2188, MHG #101
29-417 101 GS, 30-248 101 Rapier Tractor. 30-238 101
34-597 Crump & Cornish 1 ton Cargo Trailer
RT21 RAAF Track Tactical Trailer, 234-671 RAAF Track Tactical Trailer

Offline 303Gunner

  • REMLR Inc
  • Veteran
  • *
  • Posts: 1127
  • THANKS 128
  • Location: Lithgow, NSW
  • REMLR No: 128
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #7 on: May 31, 2017, 05:14:35 PM »
Mick, they are what is known in the Trailer Industry as "Parallel" Bearings, rated at 1600Kg. The inner and outer bearings are the same items, being 68110/49 (2x per Hub, 4x per Axle, 8x per PT2-2). If you're in an out of the way location and not near a specialist bearing supplier, no probs, as these bearings are the inner bearing in Ford or "Slimline" sets and are available from Supercheap, Repco, etc and even many service stations. The grease seal is also the same one used in the Slimline set.

Offline Mick_Marsh

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2009
  • THANKS 105
  • Location: Western Victoria
  • REMLR No: 310
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #8 on: May 31, 2017, 06:21:06 PM »
Mick, they are what is known in the Trailer Industry as "Parallel" Bearings, rated at 1600Kg. The inner and outer bearings are the same items, being 68110/49 (2x per Hub, 4x per Axle, 8x per PT2-2). If you're in an out of the way location and not near a specialist bearing supplier, no probs, as these bearings are the inner bearing in Ford or "Slimline" sets and are available from Supercheap, Repco, etc and even many service stations. The grease seal is also the same one used in the Slimline set.
Ta. I'll get some Friday.
Things are coming together.
REMLR # 310, MVCA # 364, 101 Club # 2188, MHG #101
29-417 101 GS, 30-248 101 Rapier Tractor. 30-238 101
34-597 Crump & Cornish 1 ton Cargo Trailer
RT21 RAAF Track Tactical Trailer, 234-671 RAAF Track Tactical Trailer

Offline 303Gunner

  • REMLR Inc
  • Veteran
  • *
  • Posts: 1127
  • THANKS 128
  • Location: Lithgow, NSW
  • REMLR No: 128
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #9 on: August 16, 2017, 12:09:56 AM »
I have some good news, and some bad news. The good news is that I've just spent the morning at Haulmark Trailers and Rocklea Canvas. Some fascinating stuff there. I enjoyed it, so that's good.  ;D

The bad news is that Haulmark cannot release either RPS for the 750Kg or 1250Kg trailers, or even an "In-house" parts list. They do still have some limited parts available, but you have ring them and ask for the"widget-thingy on the front left side" or similar, as you won't be able to quote a part number. Some parts are no longer in stock (if they are different to the parts in the G-Wagen trailer, and many are), and while they do have the drawings and can make the older parts, there will be a minimum order of the size that the Army used to make, and unless that quantity is required (unlikely) by the Army, many special parts will no longer be available.

Rocklea Canvas are also very good to deal with, but even their hands are tied with supplying the "New Auscam" canvas pattern.

Offline Diana Alan

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2241
  • THANKS 108
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #10 on: August 16, 2017, 01:20:47 AM »
Not sure this is any good
REMLR 240.
Perentie FFR 50-422, SIII FFR 30-146, SIIA GunBuggy 112-726, Mk3 Inter 170-437, ex-SADF SIIB/SIII Radio Relay,
Army Trailers: No5 x 2, W/S x 2, PT1-1.2, Horndraulic ATR dog trailer.
Civilian: MY85 RRc HiLine 4.6, MY51 ex-RACQ 80", MY91 Defender/Reynolds Boughton 6x6, MY12 D4 SDV6

Offline juddy

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2516
  • THANKS 62
    • www.landybitz.com.au
  • Location: Queensland
  • REMLR No: 352
Re: Anyone got the RPS for the Haulmark PT2-2 trailer?
« Reply #11 on: August 16, 2017, 11:28:00 AM »
I have some good news, and some bad news. The good news is that I've just spent the morning at Haulmark Trailers and Rocklea Canvas. Some fascinating stuff there. I enjoyed it, so that's good.  ;D

The bad news is that Haulmark cannot release either RPS for the 750Kg or 1250Kg trailers, or even an "In-house" parts list. They do still have some limited parts available, but you have ring them and ask for the"widget-thingy on the front left side" or similar, as you won't be able to quote a part number.

What is the reason for not releasing a parts book? These trailers are now on the civi market, and are hardly classified piece of military equipment.

Whats the widget-thingy on the front left side" or similar
1991 110 Truck Surveillance (RFSV), Winch MC2 *51-656*
2004 Truck, Carryall, Lightweight, Modified Military Special, With Winch, MC2/3 205-301, Haulmark PT1-1.2 *205090* No5 Trailer

Images 2008-2017 J Burton