Author Topic: polyurethane paint tips  (Read 3828 times)

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 352
  • THANKS 15
  • Location: Springfield
polyurethane paint tips
« on: December 23, 2016, 08:48:40 PM »
Any tips for spraying polyurethane paint? I have an ex SAS Polaris to repaint.
Tom

Offline 303Gunner

  • REMLR Inc
  • Veteran
  • *
  • Posts: 1127
  • THANKS 128
  • Location: Lithgow, NSW
  • REMLR No: 128
Re: polyurethane paint tips
« Reply #1 on: December 24, 2016, 08:32:55 PM »
If you don't know what you're doing with Aliphatic Isocyanates or have the equipment to spray it safely, don't use it, stick with enamel. It's not really a DIY product. There's a reason why it has safety warnings plastered all over the vehicle. Cancers of the respiratory system or lymph glands, or skin irritation, or children with two heads can really spoil a great paint finish. You would want to have a real good reason why Enamel won't work for you.

That said, if you have the correct PPE, it sprays in exactly the same way as enamel. No particular difference in technique, just that the pot goes off in about 3hrs.

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 352
  • THANKS 15
  • Location: Springfield
Re: polyurethane paint tips
« Reply #2 on: December 25, 2016, 11:52:26 AM »
it really does sound nasty! even rubbing back seems to have its issues. i have done a fair bit of spraying of enamels and acrylics and use a full face respirator etc. so assume the same would work but will think a bit more on it. Thanks for the advise.

Offline 303Gunner

  • REMLR Inc
  • Veteran
  • *
  • Posts: 1127
  • THANKS 128
  • Location: Lithgow, NSW
  • REMLR No: 128
Re: polyurethane paint tips
« Reply #3 on: December 26, 2016, 01:07:45 AM »
It really does sound nasty! I have done a fair bit of spraying ... use a full face respirator etc. so assume the same would work ..
No, it won't. You need a disposable full-body Tyvek suit and clean-air-supplied full face mask (not just filter cartridges). The Isocyanates can also irritate and enter the body through the eyes and skin - full cover and dispose of afterwards.

Offline fc101

  • Hero Member
  • *****
  • Posts: 641
  • THANKS 55
  • Location: Canberra
  • REMLR No: 243
Re: polyurethane paint tips
« Reply #4 on: December 26, 2016, 09:27:16 AM »
It really does sound nasty! I have done a fair bit of spraying ... use a full face respirator etc. so assume the same would work ..
No, it won't. You need a disposable full-body Tyvek suit and clean-air-supplied full face mask (not just filter cartridges). The Isocyanates can also irritate and enter the body through the eyes and skin - full cover and dispose of afterwards.

And if you paint it at home in suburbia it will poison all your neighbours.

Must be done in an appropriate paint booth with full coverage air supplied paint suit and hood.  Dont touch it unless you have access to the correct equipment.

Garry

Offline Ford Blitz

  • Sr. Member
  • ****
  • Posts: 352
  • THANKS 15
  • Location: Springfield
Re: polyurethane paint tips
« Reply #5 on: December 26, 2016, 01:50:19 PM »
thanks for the info i will rethink my plan
Tom

Offline Chazza

  • REMLR Inc
  • Hero Member
  • *
  • Posts: 581
  • THANKS 99
  • Location: Narrogin
  • REMLR No: 217
Re: polyurethane paint tips
« Reply #6 on: January 21, 2017, 09:40:14 AM »
In situations such as this one, it is always a good plan to Google the Material Safety Data Sheet (MSDS) first, before poisoning oneself!
S2 Command Recce '59
S2A 109" GS '63
S2A Fire Truck '64

Offline P6X6

  • Sr. Member
  • ****
  • Posts: 316
  • THANKS 25
  • Location: Perth W.A.
  • REMLR No: 445
Re: polyurethane paint tips
« Reply #7 on: January 23, 2017, 12:17:13 AM »
I know the company I work for were fortunate enough to do the LRPV upgrades in 99-01 (I think that's when) and even with dedicated spray booths and professional spray shop were still unable to paint PUP. The vehicles were modified and the taken to a specialist. Very nasty stuff!
6X6 Air Defence 9/1990 ARN 51867
6X6 Infantry Carrier 11/199 ARN 202238
4X4 RFSV 6/1991 ARN 51673
No.5 half tonne ARN 101525 & PT2-2 11/2001 ARN 203941