PERENTIE DIESEL 3.9 L LIFT PUMP?

[tona]

      THANKS FOR ALL THE REPLIES, ITS GOOD TO KNOW THAT THERE IS SOMEBODY OUT THERE WILLING TO HELP SOME ONE IN NEED, AM GOING TO GIVE IT A GO SHORTLY, TONA, P.S. WILL LET YOU KNOW OF OUT COME

[Carzee]

Thanks Laurie.

So the filter itself screws out?

Just looking at this job for my Perentie. The RPS lists no part number for the tiny plastic filter that gets clagged up. If you stuff it up (eg, if you try to pull it out rather than unscrew it), you would just have to leave it out and connect an alternative filter assembly of some kind in the line.

[boxy]

You can buy the whole bolt and filter from Isuzu. The part number is in the RPS and in the other post on this subjecy

[Carzee]

You can buy the whole bolt and filter from Isuzu. The part number is in the RPS and in the other post on this subjecy

The filter is separate in the drawing and has a component number. Is it an included part of the 17mm banjo bolt that you brought?


++++++ okay, I see it mentioned there, it is included with the new bolt. All good.

[boxy]

Yea it comes with the bolt

[tona]

     G/AY  FELLOW MEMBERS, I got around to doing the job on the lift pump filtor ,you guys were right say ing its a mongrel job , mine was about a quarter blocked cleaned it out and put it back, bled the system and away it went, am going to treat the fuel in the very near future as fuel these days leaves a lot to be desired, thanks for all the info on it  will pass this info on to who may require it,TONA.