Author Topic: Workshop Canvas drawings/measurements  (Read 8245 times)

Offline FFRMAN

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 2817
  • THANKS 211
  • Location: Western Vic.
  • REMLR No: 314
Workshop Canvas drawings/measurements
« on: July 31, 2012, 10:42:02 PM »
Hi,

I have been asked by someone on AULRO for measurements of the canvas from a workshop, apart from me pulling out my trailer and setting it up (a couple of hours of hard work!), does anyone have the drawings or have they measured them up before? I could find drawings of the trailer on REMLR.com but not the canvas.

Thanks for any assistance

Regards
Scott
Lots...............
VMVC 251,

burtonsworkshopUK

  • Guest
Re: Workshop Canvas drawings/measurements
« Reply #1 on: August 21, 2012, 02:12:44 AM »
hi i could measure my one up with a drawing or two i ve got a show this weekend if i have time there i will measure it up or the next weekend, i think my canvas is a red rocket one or one that was made by (allen or alex) not sure i have post pic of it up befor joe

Tankradio

  • Guest
Re: Workshop Canvas drawings/measurements
« Reply #2 on: August 21, 2012, 12:59:42 PM »
An excellent thread and an example of what we should be doing on this forum !

Cheers

Phill

Offline juddy

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2516
  • THANKS 62
    • www.landybitz.com.au
  • Location: Queensland
  • REMLR No: 352
Re: Workshop Canvas drawings/measurements
« Reply #3 on: August 21, 2012, 02:04:06 PM »
Here here..... :-\
1991 110 Truck Surveillance (RFSV), Winch MC2 *51-656*
2004 Truck, Carryall, Lightweight, Modified Military Special, With Winch, MC2/3 205-301, Haulmark PT1-1.2 *205090* No5 Trailer

Images © 2008-2017 J Burton

Offline FFRMAN

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 2817
  • THANKS 211
  • Location: Western Vic.
  • REMLR No: 314
Re: Workshop Canvas drawings/measurements
« Reply #4 on: August 21, 2012, 04:41:54 PM »
hi i could measure my one up with a drawing or two i ve got a show this weekend if i have time there i will measure it up or the next weekend, i think my canvas is a red rocket one or one that was made by (allen or alex) not sure i have post pic of it up befor joe

Thankyou, that would be greatly appreciated by many.

It's great that we can go to the UK to get measurements for a uniquely Australian design.

Regards
Scott
Lots...............
VMVC 251,

Offline juddy

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2516
  • THANKS 62
    • www.landybitz.com.au
  • Location: Queensland
  • REMLR No: 352
Re: Workshop Canvas drawings/measurements
« Reply #5 on: August 21, 2012, 05:05:15 PM »
I dont mind getting mine out and measuring up if required....

1991 110 Truck Surveillance (RFSV), Winch MC2 *51-656*
2004 Truck, Carryall, Lightweight, Modified Military Special, With Winch, MC2/3 205-301, Haulmark PT1-1.2 *205090* No5 Trailer

Images © 2008-2017 J Burton

Tankradio

  • Guest
Re: Workshop Canvas drawings/measurements
« Reply #6 on: August 21, 2012, 06:17:06 PM »
About the only thing I am in a position to contribute to this thread is a digital photo of printed photo of my old workshop canvas laid out on the ground.

I would have to email said image to another member to post up - but I guess that's not really going to be much help to anyone is it :o

The offer is there

Cheers

Phill

Offline FFRMAN

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 2817
  • THANKS 211
  • Location: Western Vic.
  • REMLR No: 314
Re: Workshop Canvas drawings/measurements
« Reply #7 on: August 21, 2012, 10:00:55 PM »
This is a photo of mine set up, I just don't have time right now to set it up and measure it, but will if we can't get the measurements.

Mine is a 1963 trailer NOS, it was kept as a pattern in stores warehouse - this is what I was told when I bought it, the Hardi Bar Treads are still new! Except previous owner painted it camo , wished he'd left it DBG.

Lots...............
VMVC 251,

Offline FFRMAN

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 2817
  • THANKS 211
  • Location: Western Vic.
  • REMLR No: 314
Re: Workshop Canvas drawings/measurements
« Reply #8 on: August 29, 2012, 06:35:51 PM »
OK there must be someone out there that can get their hands on the technical drawings for workshop tenting measurements..........

Any assistance greatly appreciated

Regards
Lots...............
VMVC 251,

Offline Phoenix

  • Administrator
  • Veteran
  • *****
  • Posts: 2178
  • THANKS 86
    • REMLR
  • Location: Launceston, Tasmania
  • REMLR No: 129
Re: Workshop Canvas drawings/measurements
« Reply #9 on: August 30, 2012, 09:23:35 AM »
Let me check the remlr archive
REMLR Webmaster
Eden - 1961 Series 2 Ambulance, 108-098
1973 Army Moke, 25-764

Offline Phoenix

  • Administrator
  • Veteran
  • *****
  • Posts: 2178
  • THANKS 86
    • REMLR
  • Location: Launceston, Tasmania
  • REMLR No: 129
Re: Workshop Canvas drawings/measurements
« Reply #10 on: August 30, 2012, 09:25:01 AM »
Ok, it looks like we have the technical drawings for ALL parts of the workshop canopy including poles, top tarp that is often missing etc etc etc.

it is a 10mb file, but I will try and get it online this morning on remlr.com
REMLR Webmaster
Eden - 1961 Series 2 Ambulance, 108-098
1973 Army Moke, 25-764

Offline Phoenix

  • Administrator
  • Veteran
  • *****
  • Posts: 2178
  • THANKS 86
    • REMLR
  • Location: Launceston, Tasmania
  • REMLR No: 129
Re: Workshop Canvas drawings/measurements
« Reply #11 on: August 30, 2012, 09:32:14 AM »
REMLR Webmaster
Eden - 1961 Series 2 Ambulance, 108-098
1973 Army Moke, 25-764

Richard o

  • Guest
Re: Workshop Canvas drawings/measurements
« Reply #12 on: August 30, 2012, 03:23:05 PM »
Good stuff, great to see that online  :)

R


Offline FFRMAN

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 2817
  • THANKS 211
  • Location: Western Vic.
  • REMLR No: 314
Re: Workshop Canvas drawings/measurements
« Reply #13 on: August 30, 2012, 06:17:45 PM »
Thanks Phoenix, fantastic

Regards
Scott
Lots...............
VMVC 251,

Offline Greg & Tony Egretz

  • Hero Member
  • *****
  • Posts: 573
  • THANKS 26
  • Location: Stanwell
  • REMLR No: 150/368
Re: Workshop Canvas drawings/measurements
« Reply #14 on: August 30, 2012, 09:53:14 PM »
Thanks Phoenix and I got 3 to do
Regards Greg
Myrtle   63 2A Ambulance                - 112-115  (GREG)
Petri     64 2A Workshop Hard Top  - 113-773 (GREG)
Casper 65 2A Workshop Hard top   - 113-841 (GREG)
Shortie 63 2A SWB Survey              - 112 502 (Anthony)