Author Topic: Rear Light Cluster ( akk Soap Dish )  (Read 2215 times)

Offline juddy

  • REMLR Inc
  • Veteran
  • *
  • Posts: 2516
  • THANKS 62
  • Location: Queensland
  • REMLR No: 352
Rear Light Cluster ( akk Soap Dish )
« on: July 21, 2012, 08:06:01 PM »

The light clusters, attach to the cross member with 4 bolts, am I correct in saying the 4 bolts also attach the lamp base plate to the light cluster and then to the cross member, leaving the lens to be attached to the lamp base.

If so how on earth can you do this as if you what the screws to stay horizontal that go from the lens to the lens base back plate, the bolts that attach the light cluster would bi in the way, directly behind the lamp base plate.  I can attach all of the above but would have to have the lens vertical. ie screws 12/6 oclock.

Also the new old lamps I have need re-drilling as the holes are too small for the correct bolts....

Does that make sense????
1991 110 Truck Surveillance (RFSV), Winch MC2 *51-656*
2004 Truck, Carryall, Lightweight, Modified Military Special, With Winch, MC2/3 205-301, Haulmark PT1-1.2 *205090* No5 Trailer

Images © 2008-2017 J Burton

Offline FFRMAN

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 2817
  • THANKS 211
  • Location: Western Vic.
  • REMLR No: 314
Re: Rear Light Cluster ( akk Soap Dish )
« Reply #1 on: July 22, 2012, 07:22:38 AM »
Hi JUddy,

What you are saying is all correct and the lense screws are at 12/6 O'clock, hope it shows in this photo

VMVC 251,