Author Topic: Getting vehicles ready for the 25th April  (Read 4566 times)

Offline DennisM

  • Veteran
  • ******
  • Posts: 1036
  • THANKS 256
  • Location: Hunter Valley
  • REMLR No: 70
Getting vehicles ready for the 25th April
« on: March 13, 2015, 04:35:48 PM »
As always when an event comes along, you have to check that all vehicles are running as good as is possible, but something always gets in the way, the Workshop L/R fitted with a Zenith carb didn't want to play the game last weekend, so today I revisited the carburetor issue on my S2A 109 Lightweight Workshop vehicle, I have to have it running properly before the 25th of April (Anzac day) this time it wouldn't run at all, so I suspected the ball was stuck under the petrol pump as I couldn't see fuel being sprayed down the throat when the throttle was opened, so off it came

it was piddling rain this morning so the job had to be done in the shed, as the Land Rover has way too much canvas on it.
The carburetor was dismantled, then out with my small surface plate to rub down all the mating surfaces so that they are relatively flat

I suppose a few of us have been down this road before, all sprayed with carb/cleaner, email sent to Nick @ Blanchards for replacement gaskets etc , now I just have to wait approx. 1 week for the bits to arrive, cheers Dennis  :(
psw the ball under the pet/pump was stuck, the pet/pump came out with no fuss either, which is unusual,,.

Offline Rangy35

  • Sr. Member
  • ****
  • Posts: 271
  • THANKS 35
  • Location: Canberra
  • REMLR No: Don't know what this is.
Re: Getting vehicles ready for the 25th April
« Reply #1 on: March 13, 2015, 09:12:52 PM »
Nice work, carby overhauls sooo much fun, the tuning after that work is always my high.....are the shafts all good.

Offline DennisM

  • Veteran
  • ******
  • Posts: 1036
  • THANKS 256
  • Location: Hunter Valley
  • REMLR No: 70
Re: Getting vehicles ready for the 25th April
« Reply #2 on: June 20, 2015, 01:46:33 PM »
Well a long winded reply, I ended up buying a new carburetor and fitting it after Anzac Day, but the problem was far deeper than just the carburetor. The fuel tank had it's share of muck in the bottom, so it was removed and cleaned out, then a coat of 'Red-Kote' liquid applied, allowed to dry, then all re-assembled.
I have modified the original fuel line by putting an inline fuel filter using some of the old line and new rubber fuel line, it is all OK now, no leaks, starts straight up from cold, now just need some days when the weather clears a little, as I don't like taking this Land Rover out in the rain

another image with trailer

anyway it will just have to wait, cheers Dennis  :)

Offline 2short

  • Hero Member
  • *****
  • Posts: 709
  • THANKS 41
  • Location: vic
  • REMLR No: 471
Re: Getting vehicles ready for the 25th April
« Reply #3 on: June 20, 2015, 04:42:09 PM »
That's one awesome workshop. 8)

Offline AGAS 5

  • Hero Member
  • *****
  • Posts: 992
  • THANKS 261
  • REMLR 218
  • Location: Great Southern Land
  • REMLR No: 218
Re: Getting vehicles ready for the 25th April
« Reply #4 on: June 21, 2015, 08:07:43 AM »
Hi Dennis,

That workshop presents very well and is a credit to you. Well done :)

Pete
Series 2A SWB 113-300 VTF  6 RAR
Perentie FFR 49-290  2 Sig Regt
Perentie FFR 49-390  1 MP BN
Perentie GS 50-087  5 RAR

Offline DennisM

  • Veteran
  • ******
  • Posts: 1036
  • THANKS 256
  • Location: Hunter Valley
  • REMLR No: 70
Re: Getting vehicles ready for the 25th April
« Reply #5 on: June 21, 2015, 06:14:09 PM »
Thanks for the positive + comments, I can clearly remember the thousands of hours bringing the Land Rover back to life as it was, cheers Dennis  :)

Offline DennisM

  • Veteran
  • ******
  • Posts: 1036
  • THANKS 256
  • Location: Hunter Valley
  • REMLR No: 70
Re: Getting vehicles ready for the 25th April
« Reply #6 on: June 28, 2015, 05:44:06 PM »
Sadly no film of the test drive, I haven't a clue what I've done to my Go-Pro, it was working as I saw the seconds ticking over in the display area on the camera, anyway after moving 6 vehicles & a No5 trailer, the Wksp was moved out of the shed, fuel added, and away it went. I drove it about 4-5k's around the streets, it did everything it should have, then it was reversed back into it's position in the shed, a very trying exercise moving all of them about, especially when I had to start one on the crank handle, anyway cheers Dennis  :)

Offline Minikeg

  • REMLR Inc
  • Sr. Member
  • *
  • Posts: 459
  • THANKS 77
  • Location: Newcastle
  • REMLR No: 316
Re: Getting vehicles ready for the 25th April
« Reply #7 on: June 30, 2015, 12:25:24 AM »
you suffer from TMLR Syndrome.. I can help you with that ;)

(Too Many Land Rovers ;D)
I'm not completely useless.. I'm missing some of the pieces
110-415 'Agro' 1959 88" CR              111-676 'Pickles II' 1959 88" CR
114-270 'Maya' 1967 109" GS/WS      113-368 'Castrol' 1964 88" GS
48-975 'Reptar' 1988 110" FFR           48-932 'Widget' 1988 110" GS