Author Topic: 6x6 winch info  (Read 5711 times)

Offline dimbulah

  • Newbie
  • *
  • Posts: 34
  • THANKS 2
  • Location: Dimbulah
6x6 winch info
« on: December 31, 2013, 09:11:52 PM »
Dose any one have a manual or info on the 6x6 winch, I do have info on the 4x4 winch but I do believe the 6x6 winch is a little different.
Thanks,
Dimbulah.

Offline Phoenix

  • Administrator
  • Veteran
  • *****
  • Posts: 2182
  • THANKS 87
    • REMLR
  • Location: Launceston, Tasmania
  • REMLR No: 129
Re: 6x6 winch info
« Reply #1 on: January 03, 2014, 12:55:47 PM »
I thought that they were the same unit.  Did you check the inter manuals that went up on to REMLR recently?
REMLR Webmaster
Eden - 1961 Series 2 Ambulance, 108-098
1973 Army Moke, 25-764

Offline dimbulah

  • Newbie
  • *
  • Posts: 34
  • THANKS 2
  • Location: Dimbulah
Re: 6x6 winch info
« Reply #2 on: January 03, 2014, 01:51:01 PM »
Sorry for the bad drawing, This is the difference as far as I know.
I have a manual for the 4x4 but would like one for the 6x6 if any one has one.
Dimbulah.

Offline dkg001

  • Full Member
  • ***
  • Posts: 148
  • THANKS 27
  • Location: albury
Re: 6x6 winch info
« Reply #3 on: January 03, 2014, 04:39:53 PM »
They are the same winch, only difference is the drive, the workshop manual from the 4x4 should cover most of it, there must be a workshop manual for the 6x6 but I have never seen one. There is a copy of the F1, 2 user manual in the REMLR library which will give you all the operational details. 



Offline dimbulah

  • Newbie
  • *
  • Posts: 34
  • THANKS 2
  • Location: Dimbulah
Re: 6x6 winch info
« Reply #4 on: January 03, 2014, 07:18:06 PM »
I do have the copy of the F1/F2 Technical manual and all so the Mk3 service manual.
Dose any one have a copy of a 6x6 workshop manual that I could beg, borrow, buy, steel or swap my first born for. ;D
dkg001, I do have a copy of the 4x4 winch manual, that's how I found out there was a difference. :)