(Draft - in progress)
GS variant in general
std ROPS and canopy hoops
fuel tank filler, rhs only
lash rings on the floor, qty 8
floor and lower panel protector strips, riveted on, ~20mm wide (std to most Landy tubs for decades)
lashing weight warning sign stencilled on the rear face of the cab bulkhead
folding seating, full length, qty 2, rhs and lhs
tailgate at rear with 2 tac plate holders, and numberplate light (offset)
tool lockers, qty 2, rhs and lhs (exterior opening with budget key)
stretcher poles mounts, qty 4 (2 on cab bulkhead, 2 on rear corner panels)
rubber jerrycan cushion/protector, D profile, to match single jerrycan holder, rhs and lhs
FFR variant in general
std ROPS and canopy hoops
fuel tank filler, rhs only
nil lash rings on floor
floor and lower panel protector strips, riveted on, ~20mm wide (std to most Landy tubs for decades)
nil lashing weight warning sign stencilled on the rear face of the cab bulkhead
folding seat, single size, qty2, at rear corners of tub, rhs and lhs
scooped rear access panel (no tailgate) with 2 tac plate holders, numberplate light (centered) with steel protector
tool lockers, qty 2, rhs and lhs (exterior opening with budget key)
battery lockers, qty 2, rhs and lhs (exterior opening with budget key)
twin battery bracket, HD, qty 2, slides for access, rhs and lhs
rubber jerrycan cushion/protector, D profile, qty 2, to match single jerrycan holder, rhs and lhs
24v distribution box, qty 1, cable access holes, and sundry radio ces fittings, incl. overhead light and radio table (qty varies)
bodywork box with lid on floor fixed to rear face of cab bulkhead, shortening floor area
aerial base brackets, aka sugar scoops, qty 4, bolted to exterior utilizing tub capping strips on rhs and lhs
aerial cable access holes, matching aerial bracket positions, qty 4, with rubber grommets, rhs and lhs
FFR variation, eg to suit artillery computer (eg 48-975)
front ROPS bar fitted at rear also
ROPS bars connected overhead by bars
rear end of seating level horizontal panel cut and lowered
RFSV (Mission Upgrade Kit)
double ROPS (more elaborate and higher due to rear passenger seat) and custom canopy hoops
fuel tank filler, rhs and lhs
lash rings on floor, qty ?
nil floor and lower panel protector strips
nil lashing weight warning sign stencilled on the rear face of the cab bulkhead
storage lockers, HD large, with hinged lid, rear interior rhs and lhs, approx. half as long as the seating panels
jerry can and ammunition box brackets, rear interior rhs and lhs, forward parts of tub
seat, with headrest and seat belt, special mount brackets, central forward part of tub
scooped rear access panel (no tailgate) with 1 tac plate holder, rhs
tool lockers, qty 2, rhs and lhs (exterior opening with budget key)
battery lockers, qty2, rhs and lhs (exterior opening with budget key) (one has batteries, one has security box)
twin battery bracket, HD, qty 2, slides for access, rhs and lhs
mesh design storage baskets, qty 2, fitted along exterior of tub sides, rhs and lhs
rubber jerrycan cushion/protector, D profile, qty1, to match twin jerrycan holder, rhs
twin spare tyre bracket and hinged securing bar, qty 1, lhs (incl. numberplate light with steel protector)
aerial cable access holes, plated over, qty 4, rhs and lhs
personnel access step, qty 1 (fits on rear crossmember above pintle hook)
jerrycan storage/stash box and webbing underneath rear of tub (uses spare tyre crank)
SRV-ADG
lash rings on the floor, qty 6
drain holes, front of tub on floor near bulkhead, with rubber plug, qty 2
reinforcing plate, from front to rear along the side panel that seatbacks on a GS variant would cover, qty 2, rhs and lhs
SRV-SF
Survey HT
WGN-SC
WGN-PC
