Registry of Ex Military Land Rovers

REMLR Technical => Electrical => Topic started by: dugite on May 12, 2020, 01:35:42 PM

Title: 12 Pin "NATO" Trailer plug on No.5 trailer
Post by: dugite on May 12, 2020, 01:35:42 PM
Hi all,

I'm just renewing the old weathered wiring in a No.5 trailer.

I would appreciate if anyone can let me know how to access the rear of the trailer plug to reach the rear of the pin terminals.

Does the metal section push forward out of the rubber containment? If so does anyone have any tips how to go about this.

thanks - Laurie
Title: Re: 12 Pin "NATO" Trailer plug on No.5 trailer
Post by: Sixty on May 12, 2020, 06:24:32 PM
Laurie,
Loosen the hose clamp (if fitted), push the cable into the plug, and then using a small flat screwdriver, lever the grey rubber bung out the front of the nato plug.
Title: Re: 12 Pin "NATO" Trailer plug on No.5 trailer
Post by: dugite on May 12, 2020, 07:14:35 PM
well described Sixty, thank you very much 😀