Registry of Ex Military Land Rovers
Land Rovers => Australian "Perentie " 110 & 6x6 Vehicles => Topic started by: Tonyp on December 12, 2014, 01:34:54 PM
-
Got a fuel leak at 3/4 full - any suggestions. Also any tips if I have to pull the tank
-
Check the sender unit and return flange seals as well as the small blanking plate on the top/front of the tank.
I had leaks from all three when the tank was above 1/2 full.
If those are all ok it is likely to be a rust pin hole.
Those can be sealed be cleaning and coating the tank internally, see the Permanent Painted Coatings web site. Sorry, I couldn't get the link to work.
Phil B
-
Try here I think por 15 is what you are looking for :)
http://www.ppcco.com.au/por28.html