Registry of Ex Military Land Rovers
International Trucks => International Truck Chat => International F1, F2 & F5 => Topic started by: jsfnq on December 20, 2012, 02:54:17 PM
-
hello- i am trying to source a waterpump for 6x6 F2 tipper.
engine is original petrol 6-283 .
-
Wagga Truck & Tractor have new ones for sale on ebay for $439.50, must be getting rare last time I had a look at their prices they were about $325, I probably have a good s/h one, pm me if you are interested.
-
If the pump housing is still OK you should be able to buy the bearing and seal from any bearing shop, or agricultural parts merchant. The last pump I did for an International AB 130, cost about $40 to re-condition,
Cheers Charlie
-
This is the kit i have. i am yet to pull one apart so no idea if these are the only part you need.
(http://farm9.staticflickr.com/8084/8291305134_6db601983e_c.jpg) (http://www.flickr.com/photos/gypsygibbo/8291305134/)
-
Good news; you have an impeller which is often the part that breaks! :D
If you have an International truck workshop manual, have a read on how to do it; you will need a press and assorted supports to avoid breaking the housing. Perhaps the best thing to do would be to take it to a garage used to repairing trucks and ask them to do it, unless you can find an experienced helper,
Cheers Charlie