Registry of Ex Military Land Rovers

REMLR For Sale => Parts Wanted => Topic started by: juddy on November 17, 2012, 08:44:46 PM

Title: wheel nuts
Post by: juddy on November 17, 2012, 08:44:46 PM

2x wheel nuts for series required...

Title: Re: wheel nuts
Post by: FFRMAN on November 17, 2012, 10:10:47 PM

Do you need the smaller double sided series 2wheel nut or the series 3 wheel nuts?

Title: Re: wheel nuts
Post by: juddy on November 17, 2012, 10:51:10 PM

Well I think series 2 ones, the ones off the series 3 dormobile don't fit too big, the dormobile ones fit the 96 defender 130, the 130' ones don't fit the workshop too big, looking at both the series 2 ones have a smaller diameter.

Title: Re: wheel nuts
Post by: Vixen on November 18, 2012, 09:02:34 AM

They are different Juddy  :D Series 2 wheel studs are smaller diameter than series 3 wheel studs.
Then there are short nuts and longer double ended nuts.

Hence S2 wheels won't fit S3 studs (smaller holes) and if you put S3 wheels on S2 studs they slop around and can flog the holes out (unless you use the right nuts)  ;)

Title: Re: wheel nuts
Post by: bronzie66610 on November 18, 2012, 03:21:09 PM

How many nuts do you need. ? Specify which one and I will post free of charge to you.
David

Title: Re: wheel nuts
Post by: juddy on November 18, 2012, 03:52:14 PM

x2 to fit 1071 series 2a.....

Title: Re: wheel nuts
Post by: bronzie66610 on November 20, 2012, 10:37:01 AM

Hi Juddy
pm your address and i will send you some wheel nuts
David

Title: Re: wheel nuts
Post by: Mick_Marsh on November 20, 2012, 06:48:53 PM

Looking at my trailers, they all have the same rim.
The Tracks (which were built in the mid nineties) have what look like County/RRC nuts. The Crump & Cornish has double ended nuts.
Did I mention, they all have the same rim?

Title: Re: wheel nuts
Post by: bronzie66610 on November 20, 2012, 10:32:03 PM

Hi Juddy
I will send you two (2) nuts of every type and you will get the ones you want.
David

Title: Re: wheel nuts
Post by: juddy on November 20, 2012, 11:16:08 PM

Thanks all for offering to send a couple of spare nuts, I will take a picture this week, and measurement so we have the correct ones.

Title: Re: wheel nuts
Post by: bronzie66610 on November 22, 2012, 02:32:15 PM

Hi Juddy
My nuts wont fit but have a few spares as Diana described. Available free of charge and post free.

Title: Re: wheel nuts
Post by: rednjoey on November 24, 2012, 01:37:02 AM

I think you're all nuts.....