Registry of Ex Military Land Rovers
REMLR Technical => Electrical => Topic started by: Rob6x6 on December 24, 2017, 07:45:19 AM
-
G'day all, I am having a problem with the dash lights and horn not working on my 6x6 perentie. I assume that they are on the same circuit. I have checked all fuses and they are ok. Just wondering if anyone has had the same problem or where would be a good place to start looking for the fault.
Cheers Rob
-
;) G/AY FELLOW MEMBERS,MERRY XMAS TO ALL ,QUESTION ,WHY DOES MY INDICATORS SELF CANCEL AS I START TO TURN RIGHT,ALL IS WELL WHEN INDICATOR IS TURNED TO LEFT , STEERING WHEEL IS CENTRED, THE PLASTIC GISMO UNDER THE WHEEL IS CENTRED, ANY IDEAS AS TO WHATS GOING ON , THANKS IN ADANCE ,TONA,.
-
;) G/AY FELLOW MEMBERS,MERRY XMAS TO ALL ,QUESTION ,WHY DOES MY INDICATORS SELF CANCEL AS I START TO TURN RIGHT,ALL IS WELL WHEN INDICATOR IS TURNED TO LEFT , STEERING WHEEL IS CENTRED, THE PLASTIC GISMO UNDER THE WHEEL IS CENTRED, ANY IDEAS AS TO WHATS GOING ON , THANKS IN ADANCE ,TONA,.
Hi Tona, Merry Christmas to you. I just ask my father about your indicators problem. He said your indicators are worn and it need to remove and replace or repair it.
Kind regards,
Perentiewrecker
-
G'day all, I am having a problem with the dash lights and horn not working on my 6x6 perentie. I assume that they are on the same circuit. I have checked all fuses and they are ok. Just wondering if anyone has had the same problem or where would be a good place to start looking for the fault.
Cheers Rob
Hi Rob, they are seperate circuits. I never have similar problem. I suspect you should go check earth point (possibly lose contact with earth), wiring (see any cut or fray, check connectors if there any lose or broken) and load (dash lights and horn). Also I attach wiring diagrams, it may help you to track down wiring. Merry Christmas.
Kind regards,
Perentiewrecker
-
Thanks perentie wrecker,
I will do a little digging around and see what I can find. It did seem strange that they both stopped working at the same time. Thanks for the wiring diagrams I will try to get my head around it.
Cheers Rob
-
:(HI perentiewrec ker, tell dad i replaced the indicator assembly last year, he may have something here as the lever is sloppy from new, i will check and get back to you as soon as i stop having xmas drinks,TONA,.