Registry of Ex Military Land Rovers

REMLR Radio Shack => REMLR Radio Chatter => Topic started by: kman on May 27, 2015, 07:08:07 AM

Title: Radio Tables
Post by: kman on May 27, 2015, 07:08:07 AM

I am about to mount an RT524, AM2060, two R442s in my S2a FFT. I have all the antennas, cables, PRC25, mounting plates but
 really need some radio tables - these are the flat tables that raise the installation.

Anyone know of a possible source?

Thanks, Howard

Title: Re: Radio Tables
Post by: FFRMAN on May 27, 2015, 08:16:40 AM

On the 2A's was it one table that went the width of the tub just in the tub behind the seats?

Title: Re: Radio Tables
Post by: kman on May 27, 2015, 08:50:03 AM

For Larkspur radios it was. For the later radios I am installing they are the same as the Perentie tables.

Howard

Title: Re: Radio Tables
Post by: lucipla on May 27, 2015, 09:52:13 AM

Hi all

What radios was originally installed in the S2a ?

Title: Re: Radio Tables
Post by: aussiegregmac on May 27, 2015, 10:03:55 AM

In early days the Larkspur installations.  C42/C45 and B47 common.
Later on RT524 and GRC160 installations and sometimes HF sets as well.

Title: Re: Radio Tables
Post by: kman on May 27, 2015, 10:28:47 AM

And an oddball installation was a Larkspur C11/R210 HF plus an SCR522 AM VHF Air Band.

Howard

Title: Re: Radio Tables
Post by: Phoenix on June 03, 2015, 10:27:33 PM

THe late tables, series 3 type, we have no source of per say, but there is technical drawings done by a member on the remlr website if I recall at http://remlr.com/technical-drawings.html


scratch that, it is not, but I do have one.  email webmaster@remlr.com for a copy.