Registry of Ex Military Land Rovers
REMLR For Sale => Parts For Sale => Topic started by: dodgeguy1942 on March 19, 2014, 09:26:43 PM
-
Message any parts that you need
-
Did you sell your DUKW?
-
What are the door handle locks like in this one. I have tried to put key locks in mine but the area the barrel goes in has been taken to with a grinder or similiar. Seeking a workable handle assembly that will take a key lock.
Thanks
-
What are the door handle locks like in this one. I have tried to put key locks in mine but the area the barrel goes in has been taken to with a grinder or similiar. Seeking a workable handle assembly that will take a key lock.
Thanks
I have noticed a lot of the locks and handles to be very poor, night be more cost effective for you to get a new set...
-
I an thinking that will be the way to go...... I can't do anything with the ones I have at the moment.
-
I'm after this bit.
(http://remlr.com/forum/index.php?action=dlattach;topic=1404.0;attach=2684;image)
-
Mick.
Theres loads about.....
-
Mick.
Theres loads about.....
i know.
I tripped over a couple yesterday but I thought it wasn't worth the effort to bend down and pick them up.
-
Now now dont be funny, theres stacks in the US, and Germany for you to buy..
-
I got one for you Mick
-
G'day Dodgeguy,
I'm after a Perentie C of G plate as per this thread - http://remlr.com/forum/index.php?topic=1946.0 (http://remlr.com/forum/index.php?topic=1946.0). I'll PM you too.
-
Hi Dodgeguy1942
I'm looking for a rust-free Perentie passenger side door bottom if you have one on offer.
Cheers
trraca
-
G'day,
Do you have any of the following ex-Army Perentie GS bits in good shape:
- bonnet
- driver and passenger seat
- canopy (not leaking/no holes)
- winch
Cheers,
Ian
-
Hi to u all We are looking for a Drivers seat for 110 perentie FFR CONTACT IAN LEDWIDGE 0354807878
Moama museum
-
Looking for a passenger side footwell floor plate. Can you help?
Cheers,
Ian
-
Hi,
Looking for a rotating pintle hook if you have one?
Cheers
Matt
-
Hey Dodgeguy.
Im after the front drivers side guard for perentie. Need the whole assembaly. Do you have this?
Cheers, Jake
-
Would you by any chance have a roof rack for me please?
-
Hi, for some reason I can not reply to PM's everybody is blocking me, I don't know what I have done wrong.
I have other commitments I made for that weekend.
I do want it but not going to Corowa, where do you live? Maybe I can drive through and collect, unless someone from Canberra has the time and space to hitch a lift for the roof rack to Canberra.
-
No worries I am located near bathurst
-
Cool, I will contact you after the Corowa weekend, That is a nice day drive to you and I can "Race" the Perentie around Mount Panorama.
Thanx its sold.
-
Just a big thanx to everyone whom assisted in making the buying and shipping of my roof rack possible, you are true gentleman and I hope I can return the favour to a member some day.
Thank you very plenty much. ;D
-
:) I took a photo of Wayne's GS with two roof racks one on the other. The metal cable ties from Bunnings work ok. Always carry some. (yep, that is a tank on a low loader hiding behind the GS).
-
Hi dodgeguy1942
I suspect that the old man (Glenn) ran into you at Corowa? but we have not had the opportunity to follow up. Dad has an incomplete 110 Cargo. We are chasing the following:
- Fuse box cover
- Map light clip
- Dash light dimmer switch
- Instrument cluster blackout light bracket (little angle bracket that supports the idiot-lights cover)
- Wheel changing gear
- Front blackout lights (both left and right)
- interior light + rear vision mirror + bracket (origional bracket pop-rivits broken off windscreen frame)
- hazard light switch + interior light switch
- alternator
That would pull us up
Best regards
Adam and Glenn
-
I'm after a set of Front black out lights and tac plates.
Nick
-
I'm after a set of Front black out lights and tac plates.
Nick
http://www.ebay.ie/itm/MILITARY-FRONT-FENDER-BLACKOUT-LIGHT-WILLYS-M38-M38A1-M170-UNIMOG-S404-1pc-ship-/151658832374?pt=LH_DefaultDomain_3&hash=item234f9221f6
I assume you mean the holders. You get these from a transport truck supplier ie hazard , long load etc you know what I mean. had a link somewhere if you cant find a pair PM me and Ill get it for you.
Phil
-
Thats the ones, Thanks Philthy!
-
Chasing a camo perenti soft top in fair condition , have you or do you know of one ?
Cheers Peter
-
Chasing one of the safety chain pins, the one next to the pintle hook
Garry
-
Message any parts that you need
Maybe you missed my last PM, so I'll try again .... here's its contents ...
Yes, give me a price on both bare and glassed RHS door tops please.
Also, I need the two horizontal buffer rubbers that are mounted above the jerry holders ('D' shaped cross section).
I'll take four jerry holders if you have them ... 2 RHS, 2 LHS. I'll need you to send them via post if possible, so please include a packing charge with the postage quote once I decide which window to buy, that is, if you have it.
If you want, give me your given name and phone number and I'll give you a call.
Thanks and Regards,
Daryl.
-
PM sent :)
-
Hi.
I am after the roll bars off of a gs or ffr (rops)
Do you or has anyone still have these for sale?
-
Try hilton pollard
-
Hilton son is on this forum as master chief
-
Thanks for you help with the ROPS.
-
Do you have the Pioneer tool fittings?
Howard
Message any parts that you need
-
I think there is still a set here
-
I'm chasing a antenna bracket off a ffr
-
Hi might need a heater for rwc if you have one?
Thanks
-
Message any parts that you need
Perentie 6x6 drop gate swing bracket (fitted to/on tray) call me on 0412 182 528 thanks Allan
-
Do you have a rim still lying around please?
-
No sorry all gone now except for some diffs, bent chassis and doors and the odd small part
-
Do you have a passenger side seat belt with a 21mm wide tongue or a seat belt stalk to fit the wider 28mm tongue.
Thanks
Jon
-
Any chance you have one of the fiberglass map-holders off the doors?
-
Any chance you have one of the fiberglass map-holders off the doors?
If he hasn't, try Triumph Rover at Lonsdale in SA. They have a GS but I'm not sure about the holders.
-
There are some door bottoms here
-
Hi, I was chasing the top part of the dash. One without any cracks if there is such a thing now days. If yours is intact let me know.
-
I will have to check
-
I am after one the knobs that hold the fuse cover on in front off the gear stick , and also black plastic trim that goes under the dash, thanks.
-
Hey mate, do you have the heater fan still? mines cactus.
Thanks
Sam
0418 315 190
-
Do you have a gear box gears rob
-
Hi, I am looking for an early type dash "crash pad" the top strip of the dashboard with the demister vent holes.
thanks,
-
Hi, I am looking for an early type dash "crash pad" the top strip of the dashboard with the demister vent holes.
thanks,
I don't have any old used ones, but I do have a new one.
-
Looking for at least a 4bd1 short block or, whole engine if necessary
-
Possibly buy a used engine at the monthly auctions -as you're in the US you could get KLR (www.klrautomotive.com.au - they provide a buying service) to bid on it for you and arrange transport (at a cost).
-
Possibly buy a used engine at the monthly auctions -as you're in the US you could get KLR (www.klrautomotive.com.au - they provide a buying service) to bid on it for you and arrange transport (at a cost).
That would be the best solution.
4BD1 engines are available from a variety of sources, probably in the US, too. But by far the bulk of them will be for the Isuzu NPR range of trucks and won't have the Land Rover bellhousing adapter fitted. This part is fairly rare to come by separately, and if you want to make up a bottom end to swap into your vehicle you could re-use the adapter off the old engine, however if you using it to fit into a Land Rover (with an LT95 or LT85) and you don't have an engine already, an NPR (or industrial type) 4BD1 is not going to work without the adapter.
All of the engines sold through AFM so far have had the adapter fitted.