Author Topic: Clutch Master Cylinder Replacement Cap  (Read 476 times)

Offline Frank G

  • Newbie
  • *
  • Posts: 3
  • THANKS 0
  • Location: Sydney
Clutch Master Cylinder Replacement Cap
« on: January 14, 2020, 09:29:46 PM »

Does anyone know where to obtain a replacement clutch master cylinder cap.

RPS 02207 nominates Part No HYL8813 which I understand was manufactured by PBR (now Bosch) PBR Part No P4982-1.

Bosch advise that mater cylinder and cap are no longer available.

Repco still supply the clutch master cylinder but not the replacement cap.

There appears to be a number of replacement caps available on Ebay, but I am unsure if they will fit the PBR clutch master cylinder.

Many thanks,

Frank G

Offline AGAS 5

  • Hero Member
  • *****
  • Posts: 907
  • THANKS 254
  • Location: Great Southern Land
  • REMLR No: 218
Re: Clutch Master Cylinder Replacement Cap
« Reply #1 on: January 15, 2020, 10:29:54 AM »
Which vehicle are you referring to ? 
Series 2A SWB 113-300 VTF  6 RAR
Perentie FFR 49-390  1 MP BN
Perentie GS 50-087  5 RAR

Offline Frank G

  • Newbie
  • *
  • Posts: 3
  • THANKS 0
  • Location: Sydney
Re: Clutch Master Cylinder Replacement Cap
« Reply #2 on: January 15, 2020, 10:42:01 AM »

This post is for a 1991 Surveillance (RFSV) and I have uploaded the information on the clutch master cylinder from Bosch.

Many thanks,

Frank G

Offline Ravvin

  • REMLR Inc
  • Hero Member
  • *
  • Posts: 548
  • THANKS 60
  • Location: Wesley Vale, Tasmania
  • REMLR No: 432
Re: Clutch Master Cylinder Replacement Cap
« Reply #3 on: January 16, 2020, 02:49:26 PM »
That looks very similar to what I replaced in my truck.
In fact, the clutch master unit is P4977 and the cap is shown as P4982.

I'll have to have a look when I get home, but I seem to remember replacing the one in my MK3 as it was cheaper than buying a rebuild kit.
The local Repco looked up the old PBR part number and found they were now made by Protex.

If I still have the old one, you are welcome to the lid, if its not cracked or perished.

Greg.

Offline fc101

  • Hero Member
  • *****
  • Posts: 560
  • THANKS 53
  • Location: Canberra
  • REMLR No: 243
Re: Clutch Master Cylinder Replacement Cap
« Reply #4 on: January 16, 2020, 03:14:52 PM »
Most good trailer parts shops will sell the caps.  Take the old in an old one to match.   

Offline Frank G

  • Newbie
  • *
  • Posts: 3
  • THANKS 0
  • Location: Sydney
Clutch Master Cylinder Replacement Cap
« Reply #5 on: January 19, 2020, 06:57:28 AM »
Greg: Thank you for the very kind offer.

FC101: Thank you, that is very sound advice.

I found a replacement master cylinder reservoir cap at Power Brakes SA Pty Ltd: (08) 8261 0888.

Rob at Power Brakes was very helpful.

https://www.powerbrakes.com.au/shop/index.php/page/shop/flypage/product_id/345/category_id/4df2110746a509be48fd88ad0c5459ea/offset/0?

Many thanks,

Frank