Author Topic: perentie fuel tank breather  (Read 100 times)

Offline asmit

  • Newbie
  • *
  • Posts: 17
  • THANKS 4
  • Location: Queensland
perentie fuel tank breather
« on: July 09, 2019, 05:31:37 PM »
Does anyone know why the breather's of the main and auxiliary fuel tanks on my RFSV (maybe the same as 6x6) have the breather tubes linked together?
This seems to cause problems when both tanks are almost full, infact, the breather hose is below the top of the tank, so I think when you have 2 full tanks the breather line is full of fuel and you will take fuel from the unselected fuel tank until the level is below the breather.

I'm thinking of adding a breather to each tank that comes out of the top of the tank and blocking off this 'joint' breather system. Has anyone done similar?
« Last Edit: July 09, 2019, 07:49:07 PM by asmit »
1991 110 Perentie RFSV: 50-395
1985 110 County
1980 109 Series 3
1977 88 Series 3