Author Topic: Oil cooler 4BD1  (Read 124 times)

Offline Tripps

  • Newbie
  • *
  • Posts: 49
  • THANKS 1
  • Location: Point Cook, Victoria
Oil cooler 4BD1
« on: November 12, 2017, 11:27:19 AM »
Hi All,

Got my engine in for a reco after a rollover (previously posted, long story short Iím an idiot and left it running too long on its side) and the fellas doing the repairs have told me it will be best to r place the oil cooler.
Problem is, I havenít been able to find a suitable one and neither have they.
Is there anyway to safely clean it out so that it will be fine to re use?
Alternatively does anyone have one available that hasnít had a bottom end failure?
Cheers,
Tripps

Online BEARMAN

  • Sr. Member
  • ****
  • Posts: 439
  • THANKS 70
  • Location: Hay Point
  • REMLR No: 430
Re: Oil cooler 4BD1
« Reply #1 on: November 12, 2017, 12:40:43 PM »
Got a feeling I might have already told someone this but there is a bloke called Grant Draney from GWD enterprises in Caboolture who used to have quite a bit of ex army Isuzu stuff. I know he had oil coolers as I bought a complete one off him. That was a few years ago so they could be all gone.  Just looked it up on the net 0417784997. Give him a call - could be lucky!
09/1998 Perentie 6X6 ARN202516 - BRUTUS

Offline Tripps

  • Newbie
  • *
  • Posts: 49
  • THANKS 1
  • Location: Point Cook, Victoria
Re: Oil cooler 4BD1
« Reply #2 on: November 12, 2017, 02:40:29 PM »
Cheers Bearman, Iíll give him a call tomorrow!

Offline Philthy

  • Sr. Member
  • ****
  • Posts: 467
  • THANKS 64
  • Location: Brisbane
  • REMLR No: 425
Re: Oil cooler 4BD1
« Reply #3 on: November 12, 2017, 05:31:07 PM »
If Bearman's contact draws a blank try here.



Isuzu Truck Parts Dealer
1121 Beaudesert Road, Archerfield, QLD 4108
Phone (07) 3177 3685

They are yet to N/A on a 4BD1 engine part for me and Iíve had some crackers.

Best if you rock up with part numbers and a bag of clams and they will do trade price over the counter.

If you need part numbers ask and Ill look it up for you.

Offline Tripps

  • Newbie
  • *
  • Posts: 49
  • THANKS 1
  • Location: Point Cook, Victoria
Re: Oil cooler 4BD1
« Reply #4 on: November 12, 2017, 07:43:24 PM »
Thanks Philthy,
The guys doing the reco tried the Isuzu mob here and they said they couldnít get one.
Iíd have assumed they were all using the same system?

Online BEARMAN

  • Sr. Member
  • ****
  • Posts: 439
  • THANKS 70
  • Location: Hay Point
  • REMLR No: 430
Re: Oil cooler 4BD1
« Reply #5 on: November 12, 2017, 10:12:14 PM »
Thanks Philthy,
The guys doing the reco tried the Isuzu mob here and they said they couldnít get one.
Iíd have assumed they were all using the same system?
The one on the 4x4 perentie is different to the one on the 6x6 and the truck motors. Do you have the correct part number Tripps?
09/1998 Perentie 6X6 ARN202516 - BRUTUS

Offline Philthy

  • Sr. Member
  • ****
  • Posts: 467
  • THANKS 64
  • Location: Brisbane
  • REMLR No: 425
Re: Oil cooler 4BD1
« Reply #6 on: November 12, 2017, 10:34:27 PM »
Thanks Philthy,
The guys doing the reco tried the Isuzu mob here and they said they couldnít get one.
Iíd have assumed they were all using the same system?

Tripps I wouldn't stress that much about it. You can get them reconditioned just like a radiator. With a ring around on the blower I believe you can use OIL COOLER 5112890030 Hitachi as a reference. http://www.industrial-radiators-australia.com.au/ new price is around $600 for one.  :o try Bearmans contact first.
« Last Edit: November 12, 2017, 10:36:51 PM by Philthy »

Online BEARMAN

  • Sr. Member
  • ****
  • Posts: 439
  • THANKS 70
  • Location: Hay Point
  • REMLR No: 430
Re: Oil cooler 4BD1
« Reply #7 on: Today at 06:57:03 PM »
Thanks Philthy,
The guys doing the reco tried the Isuzu mob here and they said they couldnít get one.
Iíd have assumed they were all using the same system?

Hod did you go Tripps? Get it sorted.
09/1998 Perentie 6X6 ARN202516 - BRUTUS