Author Topic: Right hand front fuel tank bracket/mount  (Read 1385 times)

Offline asmit

  • Newbie
  • *
  • Posts: 17
  • THANKS 4
  • Location: Queensland
Right hand front fuel tank bracket/mount
« on: October 04, 2015, 04:43:37 PM »
Hey guys,

I discovered something worrying, I think I did find it mentioned in another post somewhere, but cannot find it now.

I recently discovered the right hand fuel tank front bracket on my Perentie had broken completely at all 3 mounts on the front bracket, so the fuel tank has just been resting on the mounts for some time now... we made a replacement bracket that should be many times stronger, the original appears to be a dodgy construction. So just a warning for people to check these brackets out for cracks or other damage...
1991 110 Perentie RFSV: 50-395
1985 110 County
1980 109 Series 3
1977 88 Series 3

Offline dugite

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 1064
  • THANKS 99
  • Location: Tamworth
  • REMLR No: 374
Re: Right hand front fuel tank bracket/mount
« Reply #1 on: October 04, 2015, 04:47:04 PM »
thanks for recording this asmit

2a 109 114-341,
No.5 173-589,
W/S Platform 178-000,
PT1 204-796

Offline Dervish

  • Hero Member
  • *****
  • Posts: 522
  • THANKS 59
  • Location: Sunshine Coast
  • REMLR No: 403
Re: Right hand front fuel tank bracket/mount
« Reply #2 on: October 05, 2015, 12:06:56 PM »
I think that was my post. I MIGed mine along the crack to fix it, but then mine was nowhere near as bad as yours! That solution is better by far.

Offline Carzee

  • REMLR Committee
  • Veteran
  • ***
  • Posts: 3317
  • THANKS 149
  • Perentie FFR 50-257
    • Perentie Wiki
  • Location: Canberra
  • REMLR No: 007
Re: Right hand front fuel tank bracket/mount
« Reply #3 on: March 02, 2019, 09:25:16 PM »
One of the FFRs here had a tank change, I took photos of the bracket which appeared to be perfectly good.

We removed the front seat and floor panels and under the firewall section of the floor - ...and there was some surface rust to cleanup and cold gal.

Also we had been warned that a common rust spot was the chassis top under the floor panel where wiring etc holds mud. 

Here are a couple of photos. Dervish had cracks in the 3 bolts of the bracket. Are there other spots prone to cracking? If so I will doctor the text on the photo.

We now have a custom tank template here. Would there be a market for a better tank?

Offline 67Hardtop

  • Newbie
  • *
  • Posts: 4
  • THANKS 1
  • Location: Adelaide
Re: Right hand front fuel tank bracket/mount
« Reply #4 on: March 07, 2019, 10:35:05 AM »
Hi all, I also had a cracked fuel tank bracket on my FFR. When I fitted the new 90 fuel tank, I migged the cracked bracket and when I refitted it, I used thicker and larger diameter washers on the 3 bolts. Seems to be holding ok so far.