Author Topic: Original S3 Jack and tyre wrench  (Read 1641 times)

Offline Fathersonduo

  • Newbie
  • *
  • Posts: 10
  • THANKS 0
  • Location: Andamooka
Original S3 Jack and tyre wrench
« on: June 09, 2015, 06:29:42 PM »
Does anyone know what kind of tyre wrench and jack the S3's had. Mine has gone and the tyre wrench is just horrible and i refuse to believe that it is the original.
Any help in this matter would be greatly appreciated

Offline Magellan

  • Hero Member
  • *****
  • Posts: 659
  • THANKS 36
  • Location: NE Victoria
  • REMLR No: 383
Re: Original S3 Jack and tyre wrench
« Reply #1 on: June 29, 2015, 11:19:04 PM »
Gedday,

one thing I've found from listening around and reading is that the SIII was less customised to mil spec than previous Series Landies so it's possible it had the normal LR jack and wheel brace. Rovers North (and possibly other parts suppliers) sell OE wheel braces and jacks. For mine I have a 3t bottle jack (to cater for when it's loaded up for a trip) and the OE wheel brace.

hope this helps

Daryl
Series III FFR 30-128
No.5 trailer 101-026 (with 100 gal water bladder)

Offline R704

  • Full Member
  • ***
  • Posts: 156
  • THANKS 12
  • Location: Yarra Valley, Vic
Re: Original S3 Jack and tyre wrench
« Reply #2 on: June 30, 2015, 02:20:30 PM »
I've just pinched a set from one of my dead Discos. With a few big wooden blocks, ropes and chains it fills the rear locker nicely.
So many Landy's, None going :(