Registry of Ex Military Land Rovers

Vehicle Variants => Trailers => Topic started by: Garry on November 10, 2018, 04:04:27 AM

Title: Crump and Cornish 1 Ton
Post by: Garry on November 10, 2018, 04:04:27 AM

I picked this up a few weeks ago, and as expected there is no brakes fitted so looking for suggestions if any

Garry
Title: Re: Crump and Cornish 1 Ton
Post by: BEARMAN on November 10, 2018, 08:32:08 AM
Give Mick Marsh a yell.  I think he has found a source of aftermarket ones.
Title: Re: Crump and Cornish 1 Ton
Post by: Mick_Marsh on November 12, 2018, 07:18:40 PM
Have a look here:

http://remlr.com/forum/index.php?topic=5383.0

and here:

http://remlr.com/forum/index.php?topic=5265.0


I need to put a short update in that thread.
Title: Re: Crump and Cornish 1 Ton
Post by: Mick_Marsh on November 17, 2018, 02:41:27 PM
I spoke to the trailer parts supplier, well, the one who was prepared to get in these brake assemblies. I asked him about modifying these backing plates so they fit onto the axle.
The two backing plates with cylinder, shoes, hand brake lever, etc. modified to fit are about $600 to $700 for the pair. Further to that you will need a new hand brake cable (I might be able to do an exchange with that) an you may need to change the threads on the connecting brake pipes (I'm still confirming this).
Title: Re: Crump and Cornish 1 Ton
Post by: Garry on November 17, 2018, 07:55:34 PM

Hi Mick,

Thats not too bad, I would need to change the brake tubing anyway as damaged. Keep me informed

Garry