Registry of Ex Military Land Rovers

Land Rovers => Australian 101 FC and other FC Land Rovers => Topic started by: Phoenix on September 18, 2014, 03:08:03 PM

Title: 101 Starting Handle Needed
Post by: Phoenix on September 18, 2014, 03:08:03 PM
The Army Museum Bandiana is looking for a starting handle to complete their 101, if anybody has one spare please let me know and I will put you in contact with the museum.  The part number is was 595120
Title: Re: 101 Starting Handle Needed
Post by: fc101 on September 18, 2014, 03:44:04 PM
You got a call too.  ;D  They are also after a set of 101 tools - these are not the same as Perentie or Series 3 tools and should be the same as UK 101s.  Of they also are after a jack handle - so am I.

By the way, their 101 is now on display in the museum.  Has been a a long time happening but finally is just about finished.

Garry
Title: Re: 101 Starting Handle Needed
Post by: Phoenix on September 18, 2014, 05:25:01 PM
I heard that, I'd love a good set of photos of it on display as from memory it had the storage racks in the back still.
Title: Re: 101 Starting Handle Needed
Post by: juddy on September 18, 2014, 05:57:47 PM
There's rare as , series three is the same just needs cutting and a section adding.

I can supply the series 3 one foc
Title: Re: 101 Starting Handle Needed
Post by: fc101 on September 18, 2014, 08:38:15 PM
I heard that, I'd love a good set of photos of it on display as from memory it had the storage racks in the back still.

They were wrecked - I gave them a good set including a floor slide a couple of years back - thats how they filed me away in their databanks.

Thanks Juddy but they need the real item - they could knock one up in a flash but in a museum in needs to be the correct one.

Cheers

Garry
Title: Re: 101 Starting Handle Needed
Post by: Phoenix on February 25, 2016, 09:29:30 AM
Resurrecting this thread, and the Army useum Bandiana still need a 101 starting handle if anybody has one.

Even if somebody has one that could be loaned to them to re manufacture a duplicate it would be appreciated.
Title: Re: 101 Starting Handle Needed
Post by: Mick_Marsh on February 25, 2016, 12:16:17 PM
I can loan one to them to make a duplicate.
Do you think They'd be able to make a duplicate for me too?

What about a jack handle. I have one but need another two (possibly three).
Title: Re: 101 Starting Handle Needed
Post by: fc101 on February 25, 2016, 12:25:49 PM
I made my own from some steel rod and a pic of a real one on a 101 to get the dimensions.  When laid out on the front, noting where rubber buffers and clips are makes it pretty obvious. 

My home made one works fine and I had to use it once in anger when I had an electrical issue with my starter.

(http://i42.photobucket.com/albums/e334/gazzz21/My%20101/101%202_zpsixskftxe.jpg) (http://s42.photobucket.com/user/gazzz21/media/My%20101/101%202_zpsixskftxe.jpg.html)